基于EVSEWT的下击暴流时变平均风提取

下击暴流等极端风具有强烈的非平稳特性，给风场特性分析、结构响应计算带来挑战。根据经验将非平稳风分为时变平均风和零均值脉动风分别进行分析，是处理非平稳风速信号的有效方法。分析了几种常见时变均值提取方法的优缺点，在此基础上提出一种基于能量波谷寻找的经验小波变换方法，用于下击暴流时变平均风速提取，并将提取的时变平均风和脉动风用于分析某幢高层建筑顶部位移响应。对2组下击暴流的分析结果得出：与经验模态分解和离散小波变换方法相比，基于能量波谷寻找的经验小波变换方法模型提取的时变平均风更符合预期，对应的结构响应偏于安全。     

天然气水合物储层泥质细粉砂挡砂介质堵塞规律与微观挡砂机制

中国南海海域部分天然气水合物储层中地层砂为高泥质含量细粉砂，开采防控砂难度较大。针对高泥质细粉砂挡砂机制问题，使用粒度中值为10.13 μm的泥质细粉砂样品，模拟单向气液携砂流动条件，使用绕丝筛板、金属烧结网、金属纤维、预充填陶粒4类挡砂介质在20~80 μm挡砂精度下进行挡砂模拟实验，采用显微成像系统观察挡砂介质内部及表面砂粒沉积与堵塞动态，分析介质流通性能和挡砂性能变化，总结堵塞规律、微观挡砂机制与形态及其控制因素。研究结果表明，不同类型和精度的挡砂介质对泥质细粉砂的堵塞总体呈现堵塞开始、堵塞加剧和堵塞平衡3个阶段。随着驱替进行，挡砂介质渗透率逐渐降低，幅度会高达90%以上；同时过砂速度减缓，最终过砂率为5%~10%。根据堵塞规律和微观图像分析，提出了粗组分分选桥架、局部砂团适度挡砂、整体砂桥阻挡等挡砂介质对泥质细粉砂的3种微观挡砂机制。以粗组分分选桥架挡砂机制为主的挡砂工况下，挡砂介质堵塞渗透率较高，但过砂率超过15%，挡砂效果较差；以整体砂桥挡砂机制为主时，过砂率在10%以下，挡砂性能较好，但各类挡砂介质的堵塞渗透率不足1 D，流通性能较差。局部砂团适度挡砂机制为主时介质挡砂性能及流通性能介于两者之间。挡砂介质对天然气水合物储层泥质细粉砂的微观挡砂机制和形态受挡砂介质类型、精度、地层砂特征以及流动条件等因素控制，其规律对于水合物泥质细粉砂防控砂优化有指导意义。     

考虑速度滑移的多孔质静压气体轴承静特性

对于多孔质材料内的气体流动,基于Darcy定律建立其理论模型,并建立气膜间隙流场的雷诺方程,考虑速度滑移修正方程;将上述2个区域的压力分布方程进行耦合,通过有限元方法对耦合后的压力分布方程进行离散化,用超松弛迭代求解出气膜内各节点的压力分布,分析速度滑移对多孔质静压气体轴承静特性的影响。结果表明,考虑速度滑移所计算的气膜压力分布变化平稳过渡,没有较大的突变。计算轴承的承载力及刚度,结果显示在气密间隙小于15μm时,随着气膜厚度的增大偏心导致的压差增大使承载力不断增大;且当速度滑移系数小于0.1时,速度滑移对轴承承载力及刚度有较大的影响。     

Equilibria,kinetics and mechanism for the degradation of the cytotoxic compound L-NG-nitroarginine

L-N^G-nitroarginine (LNNA), an analog of L-arginine, is a competitive inhibitor of nitric oxide synthase which causes the selective reduction of blood flow to tumor cells. Despite the potential of LNNA to function as an adjuvant in cancer therapies, its poor solubility and stability have hindered the development of an injectable formulation of LNNA that is suitable for human administration. This work, for the first time, details a systematic study on the determination of equilibrium K_a constants and the rate law of LNNA degradation. The four K_a values of LNNA were determined to be 1.03, 1.10?×?10^?2, 2.51?×?10^?10, and 1.33?×?10^?13 M. From the kinetic and equilibrium studies, we have shown that the deprotonated form of LNNA is the main form of LNNA that undergoes degradation in aqueous media at room temperature. The rate law of LNNA degradation was found to be first order with respect to OH^? concentration and first order with respect to LNNA^? concentration. The rate constant at 25?°C and 1?atm was determined to be 0.04453 M^?1min^?1. A base catalyzed mechanism of LNNA degradation was proposed based on the kinetic study. The mechanism was found to be very useful in explaining the discrepancies and changes of the rate law at different pH values. It is thus recommended that LNNA should be formulated as a concentrated solution in acidic conditions for maximum chemical stability during storage and be diluted with a basic solution to near physiological pH just before administration.     

深部松软煤层钻孔孔周煤体变形产渣特征研究

针对煤矿井下高瓦斯软煤顺层长钻孔排渣困难、成孔率低、施工困难等问题,通过数值模拟实验研究了井下深部软煤体变形破坏特征,分析了顺层长钻孔孔周松软煤体变形特征及应力变化,以揭示顺层长钻孔孔周松软煤体变形产渣规律。研究表明:深部高瓦斯软煤顺层钻孔孔周煤体的应力平衡临界条件破坏后将发生大体积突然垮落;钻孔水平最大变形位移为1.22mm,垂直方向最大变形位移为10.7mm;径向孔周煤体垂向变形呈现逐渐减小趋势,且垂向变形明显大于钻孔水平变形。在水平方向上,钻孔孔周煤体应力分布呈现先增大再逐渐减小的变化规律,径向距离对水平应力分布的影响逐渐减小;随着径向距离的增加,钻孔孔周煤体应力分布逐渐降低,钻孔孔壁处煤体的应力出现最大值,且垂直方向处应力值最大。     

矿浆多参数在线检测系统设计

针对现有矿浆浓度检测系统存在的测量数据单一、取样过程易沉降、难以检验所取样品均匀性等缺点,设计了一种矿浆多参数在线检测系统。基于称重法测量原理实现对矿浆浓度、体积流量、质量流量等多参数的在线检测。使用基于旋流消能法的取样器实现对原矿浆均匀化及防沉降处理。基于水力学孔流原理实现对取样矿浆的均值化处理及均匀性检验。在云南某选矿厂的长期应用结果表明:检测系统所测数据与浓度壶所测数据差值在2%以内,满足工业精度要求。由取样器取出样品的不均匀度在1%以内,取样过程未出现沉降、堵塞等现象,取样效果良好。     

Application of Paris’ law for estimation of hydrogen-assisted fatigue crack growth

Based on the general form of Paris’ law a new method is proposed for estimating the rate of cracking of metals under Hydrogen-Assisted Fatigue. It is based on relating the fatigue crack growth rate of hydrogen embrittled metal to the fatigue crack growth rate of the metal without hydrogen embrittlement. One-dimensional hydrogen diffusion is assumed. Simulations using the proposed method on steel types X52, X70–80 and X80 are in agreement with published experimental tests results. The new method obviates numerical modelling of crack propagation and much reduces the computational costs.     

The use of ballistic movement as an additional method to assess performance of computer mice

This study investigates an additional method for independently evaluating performance of speed and accuracy of computer mice, based on five parameters of the initial submovement when aiming at a target. This first submovement is known to be carried out in a ballistic manner and hence the Fitts-type aiming movement may be studied by means of the established relationships for ballistic movement. To test the ballistic movement method, eight participants used four different computer mice to execute ballistic movements and Fitts-type aiming movements. Regression tests showed that the Fitts movement time was well correlated with the time and stopping-variable error of ballistic movement, implying that measuring ballistic movement parameters can predict the performance of Fitts-type aiming movements. More importantly, the use of ballistic movement method allows independent assessments of the speed and accuracy, providing additional information for input devices assessment and designs.Relevance to industryThe study illustrates the close correspondence between input device evaluation using the proposed ballistic movement method and Fitts' law. The ballistic movement method allows independent measures of speed and four types of accuracy, which should benefit input devices assessment and designs.     

环保法规对船舶涂料企业的冲击及应对措施的探讨

随着我国环境保护法规《大气污染防治法》的修订和《涂料征收消费税通知》的公布,探讨了其对船舶涂料企业的冲击及其应对措施。     

基于约束输入变速吸引律的离散重复控制器设计

针对离散时间线性系统的周期跟踪问题, 提出一种能够约束控制输入变化速度的变速吸引律, 结合干扰抑制措施构造了理想误差动态, 并由此导出离散重复控制器. 分析表明, 该变速吸引律能使跟踪误差在有限时间内单调收敛至零, 且误差收敛速度可控. 为刻画误差动态行为, 推导了有界扰动下的误差单调收敛域、绝对值收敛域和稳态误差带, 并给出了收敛步数. 针对伺服电机系统的仿真与实验结果验证了所提出控制方案的有效性.